固定天区小视场星跟踪器两颗星识别方法

研究了在观测天区固定的前提下,小视场星跟踪器视场内只有两颗观测星时的星图模式识别算法。首先简述了研究的必要性;接着简要介绍了实时星图的预处理;随后详细论述了所提出算法的具体步骤;然后说明了导航星表的制定过程。仿真结果表明了算法是有效的,并对仿真试验结果进行了分析;最后给出了结论。     

网络学习模式识别移动代理因素提取方法研究

从分析网络学习因素的角度出发,提出了利用数据融合理论和使用移动代理技术解决网络学习模式识别的问题。详细分析了网络学习模式中的主要因素,针对网络学习模式识别提出了使用移动代理(MA)进行因素提取的方法。同时运用数据融合技术中分布式缠绕判决模型进行描述,从而使有效地获取网络学习者的学习状态变为可能。也对网络学习因素提取MA的执行环境进行了具体阐述。设计了因素提取MA体系结构,分析了因素提取的执行过程,采用ATP层代理传输协议作为移动代理系统的应用层协议,负责学习模式识别的因素提取。     

重点目标防空作战中多预警机协同探测空域配置

针对重点目标防空作战中预警机空域配置问题,构建了多预警机阵位选择和架数优化配置模型.通过分析重点目标预警线划分,确定预警机防空作战具体任务,从而构建其阵位选择量化模型,并以此为基础,提出了一种在确保自身安全且充分发挥预警机固有探测威力前提下的多预警机并立航线和串接航线空域配置量化模型.实例运算结果表明,该模型能够对比分...     

Hazard evaluation of ignition sensitivity and explosion severity for three typical MH2 (M＝Mg,Ti, Zr) of energetic materials

MgH2, TiH2, and ZrH2 are three typical metal hydrides that have been gradually applied to composite explosives and propellants as additives in recent years. To evaluate ignition sensitivity and explosion severity, the Hartmann device and spherical pressure vessel were used to test ignition energy and ex-plosion pressure, respectively. The results showed that the ignition sensitivity of ZrH2, TiH2 and MgH2 gradually increased. When the concentration of MgH2 is 83.0 g/m3 in Hartmann device, the ignition energy attained a minimum of 10.0 mJ. The explosion pressure of MgH2 were 1.44 times and 1.76 times that of TiH2 and ZrH2, respectively, and the explosion pressure rising rate were 3.97 times and 9.96 times that of TiH2 and ZrH2, respectively, through the spherical pressure vessel. It indicated that the reaction reactivity and reaction rate of MgH2 were higher than that of TiH2 and ZrH2. In addition, to conduct in-depth theoretical analysis of ignition sensitivity and explosion severity, gas production and combus-tion heat per unit mass of ZrH2, TiH2 and MgH2 were tested by mercury manometer and oxygen bomb calorimetry. The experimental results revealed that MgH2 had a relatively high gas production per unit mass (5.15 mL/g), while TiH2 and ZrH2 both had a gas production of less than 2.0 mL/g. Their thermal stability gradually increased, leading to a gradual increase in ignition energy. Furthermore, compared with theoretical combustion heat, the combustion ratio of MgH2, TiH2 and ZrH2 was more than 96.0%, with combustion heat value of 29.96, 20.94 and 12.22 MJ/kg, respectively, which was consistent with the explosion pressure and explosion severity test results.     

自航式鱼雷发射装置发射管长度优化研究

基于某型鱼雷自航发射的内弹道数学模型,选择自航管的总长度作为优化目标,讨论了约束函数的取值,确定了优化问题的数学表达.采用惩罚函数法进行寻优计算,针对约束函数具有不可微和非线性的特点,采用模式搜索算法进行了无约束优化的求解,给出了优化结果并进行了比较.     

电子对抗系统中雷达情报综合技术研究

雷达情报综合是电子对抗系统数据处理中的重要环节,它可以有效地消除虚假和重复雷达。结合雷达信号出现的规律和雷达参数分布特点,讨论了雷达信号合批技术,给出了一种合批方法。该方法可以快速高效地对各类辐射源型号识别、定位的结果进行综合处理,实际应用结果表明该方法是有效的。     

Single machine scheduling with a restricted rate‐modifying activity

In this paper we consider the problem of scheduling a set of jobs on a single machine on which a rate‐modifying activity may be performed. The rate‐modifying activity is an activity that changes the production rate of the machine. So the processing time of a job is a variable, which depends on whether it is scheduled before or after the rate‐modifying activity. We assume that the rate‐modifying activity can take place only at certain predetermined time points, which is a constrained case of a similar problem discussed in the literature. The decisions under consideration are whether and when to schedule the rate‐modifying activity, and how to sequence the jobs in order to minimize some objectives. We study the problems of minimizing makespan and total completion time. We first analyze the computational complexity of both problems for most of the possible versions. The analysis shows that the problems are NP‐hard even for some special cases. Furthermore, for the NP‐hard cases of the makespan problem, we present a pseudo‐polynomial time optimal algorithm and a fully polynomial time approximation scheme. For the total completion time problem, we provide a pseudo‐polynomial time optimal algorithm for the case with agreeable modifying rates. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

基于类间最大方差法的铁谱磨粒彩色图像自动分割

在磨粒图像RGB彩色空间,选择其3个正交彩色特征,应用类间最大方差法对其分割,依据F isher判别函数选择其最佳特征与最佳阈值,实现了磨粒彩色图像的分割。大量磨粒图像分割实践证明,该分割方法具有分割精度较高、计算速度快、自适应性强等特点,是铁谱磨粒彩色图像自动分割较理想方法之一。     

基于粗糙集和神经网络的联合模式识别系统

提出了一种划分属性离散区间的新方法.针对这种划分,提出一种约简和去噪的方法.随后,建立了粗糙集和LVQ神经网络的联合模式识别系统.最后,比较了用该系统和仅用神经网络进行识别的效果,证明了该方法的有效性.     

人字齿轮传动的振动理论分析模型

通过研究分析直齿轮和斜齿轮等的扭转振动分析模型、啮合耦合型振动分析模型 ,结合人字齿轮传动的特点 ,建立了人字齿轮传动的振动理论分析模型 .